LGPXD-A自动高压喷药消毒器适用于机场、码头、船舶等大范围区域快速消毒
沃特桑尼LGPXD-A自动高压喷药消毒器，可以自动连续按比例加药（配比比例可按需要任意调节）；自动混药，进水、混药、配药、喷洒消毒同时进行；原药罐40L，储药罐500L，设备配药精度误差不大于1%。系统可24小时不间断配药，无需电源。自动泄压装置消毒停止后，降低管道压力，恢复到常压。药箱采用316优质不锈钢，容量500L，尺寸100*50*100cm，药箱带自动加热系统，水温可自动调节，设备在-40度正常运转,药箱带自动液位计，药液位置可视，工作异常报警，可自动显示药液升数。
维护注意事项：
若发现LGPXD-A自动高压喷药消毒器不出液，首先检查喷嘴口或内流通道是否堵塞，温度危害过热对非高温用处规划的喷头资料会有必定的危害影响。不正确的装置违背轴心的垫圈，上紧或其它改动方位的问题均能发生不良影响，意外损害在装置和清洁中，因为运用不正确的东西或许意外地对扇形喷嘴的喷头形成损害，扇形喷嘴作为现代企业中常运用的一种设备之一，平常咱们在对他进行运用时，我们知道它的中心方位在哪里吗，下面就一起来了解一下吧，以扇形喷嘴为例扇形喷嘴中心的部位是喷口，扇形喷嘴的喷口虽椭圆形的，喷口内腔润滑刺。这样才能确保扇形喷嘴在喷雾时，不会呈现不均匀、扇形喷嘴呈现倾斜等情况。通常来说，水滴会与粉尘粒子结合，粉尘颗粒不断沉降，达到降尘和净化空气的效果，且该喷雾系统工程对喷雾装置，自控，仪表。集成，专门用于固定管道布置除尘装置，为生产运行服务产量，降低运行的成本，该系统具有伴热系统，能设备在零下30℃环境下正常使用，高能微雾喷嘴；采用特种加工，WATERSUNNY负压抽风式原理，通过数控机床加工而成，外壳采用304不锈钢材质制造，具有冲击力大，射程远，喷雾颗粒细，磨损小，压力损失小。抑尘效果好等特点。LGPXD-A自动高压喷药消毒器的流量可根据工况任意选择，依据场地功能的不同，可采用不同大小的喷嘴，操作压力达到30~130Kg，雾粒10~80微米。
Lgpxd-a automatic high-pressure spraying disinfector is suitable for rapid disinfection in large areas such as airports, docks and ships
Watersunny lgpxd-a automatic high-pressure spraying disinfector can automatically and continuously add medicine in proportion (the proportion can be adjusted as needed); automatic mixing, water inlet, medicine mixing, medicine dispensing and spraying disinfection are carried out at the same time; the raw medicine tank is 40L and the medicine storage tank is 500L, and the dispensing accuracy error of the equipment is not more than 1%. The system can dispense medicine 24 hours without power supply. After the disinfection of the automatic pressure relief device is stopped, the pipeline pressure is reduced and returned to normal pressure. The medicine box is made of 316 high quality stainless steel, with a capacity of 500L and a size of 100 * 50 * 100cm. The medicine box is equipped with an automatic heating system. The water temperature can be adjusted automatically. The equipment can operate normally at - 40 ℃. The medicine box is equipped with an automatic liquid level gauge. The position of the medicine liquid can be seen, and the abnormal working alarm can automatically display the number of medicine liquid liters.
Maintenance precautions:
If it is found that the lgpxd-a automatic high-pressure spraying sterilizer does not discharge liquid, first check whether the nozzle mouth or internal flow channel is blocked, and the overheating of temperature hazard will have a certain harmful effect on the non high temperature nozzle information. Incorrect device, washer against the axis, tightening or other problems of changing the orientation can have adverse effects. Accidental damage in the device and cleaning, because the use of incorrect things may cause accidental damage to the nozzle of fan nozzle. Fan nozzle is one of the commonly used equipment in modern enterprises. When we use it, we know its safety Where is the center? Let's take the fan nozzle as an example. The center of the fan nozzle is the nozzle. Although the nozzle of the fan nozzle is oval, the inner cavity of the nozzle is smooth. Only in this way can we ensure that the fan-shaped nozzles do not show uneven and fan shaped nozzle tilting when spraying. Generally speaking, droplets will be combined with dust particles, and dust particles will continuously settle down to achieve the effect of Dustfall and air purification, and the spray system works on the spray device, automatic control and instrumentation. The system has a heat tracing system, which can be used normally in the environment of minus 30 ℃ with high-energy micro fog nozzle; it adopts the principle of non-traditional machining and water sunny negative pressure ventilation, which is processed by numerical control machine tool, and the shell is made of 304 stainless steel with impact force Large, far range, fine spray particles, small wear and small pressure loss. The dust suppression effect is good. The flow rate of lgpxd-a automatic high-pressure spraying disinfector can be selected according to the working conditions. According to the different functions of the site, different sizes of nozzles can be used. The operating pressure can reach 30 ~ 130kg, and the fog particles can reach 10 ~ 80 μ M.