FPZ增强聚丙烯自吸泵 塑料自吸泵

新款32FPZ-11增强聚丙烯塑料泵介绍：

FPZ耐腐蚀自吸离心泵，采用增强聚丙烯（RPP）一次注塑成型。机械强度高，耐腐蚀性能强，结构上有D.J一格的科学性，泵腔内设有吸液室，储液室、回液止回阀、气液分离室、回流孔。只需在DY次开机前灌注引液，以后不必重复灌注引液，吸入管不需安装液下底阀，工作时机械密封不需另加冷却水冷却，操作简便、安全无泄漏，是取代液下泵的Z佳产品，适用于-14℃~+80℃（RPP）的各种腐蚀性介质的输送。

新款40FPZ-18 65FPZ-28 80FPZ-32塑料自吸泵介绍：

FPZ工程塑料自吸泵一次注塑成型、机械强度高，耐腐蚀性能强，结构上有D.J一格的科学性。泵腔内设有吸液室、储液室、回液止回阀、气液分离室、回流孔，只需在DY次开机前灌注引液，以后不必重复灌注引液，在吸送介质时，液体可时断时续，断液15分钟内来液可继续吸送，机械密封不需另加冷却水冷却，操作简便，安全，无泄漏，是取代液下泵的Z佳产品。

泵材质，采用无毒、无污染，增强聚丙烯RPP（适用温度-14℃~100℃）一次性注塑成型。

FPZ增强聚丙烯自吸泵 塑料自吸泵尺寸图：

以下为老款介绍（供老用户维护或更换配件参考用）

老款泵浦概述：

FPZ自吸泵，采用增强聚丙烯（CFR-PP）一次注塑成型，机械强度高，耐腐蚀性能强，自吸泵结构上有D.J一格的科学性，泵腔内设有吸液室、储液室、回液止回阀、气液分离室、回流孔。只需在DY次开机前灌引液，以后不必重复灌注引液，在吸送介质时，液体可时断时续，断液15分钟内来液可继续吸送，机械密封不需另加冷却水冷却，操作简便、安全无泄漏，是取代液下泵的Z佳产品。

CFR-PP材质：无毒、无污染、耐一般酸碱盐类，工作温度-14℃～80℃。

FPZ 型增强聚丙X自吸泵(老款)性能参数表

产品概述：  
    103型耐腐蚀塑料离心泵,适用于输送酸、碱、盐等腐蚀性液体,在长期的使用实践中,深受各界用户欢迎。
    随着我国工业的发展和三废治理的普遍重视,对泵的结构和性能又提出了新的要求,这就是:重量轻、体积小、耐腐蚀性能好。
    为此,本单位设计并试制了一种以J330聚丙烯为原料的新式103型塑料离心泵,在同系列的泵产品中充分显示了其结构XJ、重量轻、体积小、使用寿命长等优点。
The product summary :   
    The 103 mould corrosion preventives plastics centrifugal pumps are suitable in carrying the corrosiveness liquid such as acid , alkali and salt etc , and receive all circles users to welcome deeply in the long-term use practice .
    What the development of the industry along with our country and the three wastes were administered   universally attaches importance to , and  structure and capability to the pump have been put forward the new requirement again , and this is : Weight is light and the volume is small and the corrosion preventive capability is good . this unit design and having manufactured experimently one kind of new type 103 moulds plastics centrifugal pump that takes J330 s polypropylene as the raw material have fully shown the merits such as his structure is advanced and weight is light and the volume is small and service life is long etc in with the pump product of series therefor 。

用途:
①主要用于输送不含悬浮颗粒的酸碱盐体腐蚀液体。     ②泵体材料无毒性。

The use :
1. Chiefly used to carry not  the sour alkali salt aspect of Han s suspension anything small and roundish corruption liquid .      2. Pump aspect nonpoisonous nature of material .

产品结构 ：
  103型离心泵为卧式结构，由微型交流电动机驱动；泵体材料选用J330聚丙烯塑料制成，叶轮呈单片状，并采用氮化硅和树脂石黑机械密封，轴的连接为螺纹套式连接。
  103型塑料离心泵具有结构紧凑，密封性能良好，终久耐磨、耐腐蚀性能优良、装拆方便等优点。

The product structure :
  The 103 moulds centrifugal pumps are the horizontal structure , and by the minisize alternating current motive drive The pump aspect material chooses J330 s polypropylene plastics to be made , and the impeller assumes one-chip form , and using Shi Hei of silicon nitride with resin machinery to seal up , linking of axle for the whorl set type connection .
  It is compact that the 103 moulds plastics centrifugal pumps possess the structure , and it is good to seal up the capability , merits such as the eventually wear-resisting , corrosion preventive capability is fine and loads to dismantle convenient etc .

本塑料塑料离心泵,广泛用于输送酸、碱、盐等腐蚀性液体,在长期的使用实践中,深受各界用户欢迎。
    102A型塑料离心泵,有无毒硬质聚氯乙烯塑料与ABS工程塑料两种,供广大用户选择采用。本泵主轴全部采用不锈钢材料,密封采用优质机械密封,102A型具有体积小、重量轻、结构简单、使用方便、效率高等特点。
      These plastics centrifugal pumps are extensively used to carry the corrosiveness liquid such as acid , alkali and salt etc , and receive all circles users to welcome deeply in the long-term use practice 102A s mould plastics centrifugal pumps have or not hard nature polyvinyl chloride plastics and two kinds in engineering plastics ABSs of poison , and supply that vast user selects and uses .

This pump principal axis  completely uses the stainless steel material , and seals up using high quality machinery to seal up , and 102A s mould possesses that the volume is small and weight is light and the structure is simple and the use is convenient and the efficiency advanced characteristic.

用途(The use)：
     主要用于输送酸碱等腐蚀性液体，但不得用于输送若干对ABS工程塑料有显著作用的化学品，如芳烃、脂肪烃的卤素衍生物，酮类及浓酸碱等。

    Chiefly being used to carry the corrosiveness liquid such as acid alkali etc , but must not be used to carry several pairs of ABS s engineering plastics to have chemistry article of notable effect , like the halogen derivative of aromatic hydricarbon and fat hydrocarbon , ketone and dense acid alkali etc

产品结构(The product structure):
  102A型塑料离心泵为卧式结构，由Y系列小型鼠笼型电动机驱动，泵体材料选用ABS工程塑料制成。泵体内腔光滑，叶轮为闭式，采用机械密封和耐酸橡胶圈密封等二种，全轴为不锈钢用套筒式连接。

     102A s mould plastics centrifugal pumps are for the horizontal structure , and by the small-size squirrel cage mould electromotor drive of Y s series , the pump aspect material chooses ABS s engineering plastics to be made inside the pump aspect cavity is smooth , and the impeller is for the closing type , and use that closes and the acidproof rubber of machinery is 2 kinds ring close etc , and Quan Zhouwei s stainless steel links with the sleeve type.
本单位生产耐腐蚀塑料离心泵数十年来,产品一直是自来水、化工等行业所需要的配套设备,本企业坚持质量DY,不断提高产品性能,深受广大用户欢迎。
    105型自吸式塑料离心泵是本单位Z新产品,其特点是体积小、外形美观、结构合理、质量可靠、使用方便。

The product summary
  This unit production corrosion preventive plastics centrifugal pumps was continuously the necessary equipments that the trade needs such as running water and chemical industry etc several ten years , and the quality first is persisted in by this industry , and  constantly raises the product capability , and receives vast user to welcome deeply .
  105 moulds are the newest product of this unit from inhaling type plastics centrifugal pumps , and his characteristic is that the small and outer mould of volume is pleasing to the eye and the structure is reasonable and the quality is reliable and the use is convenient . 

附表：塑料泵材质的耐腐蚀性能： 

说明：√——良好； ○——可用、但有腐蚀； ×——不可用、腐蚀严重 

以下为新款参数：